5 RO Water Purifier Problems and Their Solutions

During Covid-19 we need to ensure the safety of the drinking water we provide to our family members. With immunity becoming the key to survival, water sanitization cannot be taken lightly. If you have an Aquafresh RO Water Purifier then you have already taken a good step ahead. However, RO water purifier problems may look like a big deal on the surface but are not so tough to solve. Here are 5 such problems and their expert solutions:

1. Unfamiliar Taste or Odour

The tubing in the RO purifier is made up of copper. Within a span of time, metallic elements like chloride, sulfate, and bicarbonates present in copper get dissolved in water, giving the water a metallic smell. Likewise, if water is salty, it is an indication of the fact that salt and other solids present in the tube got dissolved in water. To prevent this, you should contact a professional and get your purifier cleaned every 6 months. Along with this, you should change the biofilm every 12 months.

2. Slow Rate of Water Flow

40 to 60 PSI (pounds per square inch) is required for the RO purifier to function properly. If the volume of water pressure is below this, then the flowing speed will be affected. If there is a leakage in the air bladder in the storage tank, it won’t create pressure. This is also one of the reasons water flow getting slowed down. Clogged water filter cartilages also reduce the velocity of the water. Replacement of cartilages every 6 months is a must to experience a better flowing rate.

3. Water Purifiers Faucet Making Noises and Vibrations

If the water tank’s valve is not closed properly, the faucet will make noise. After changing the filters and membrane if the purifier makes noises, it is because the air is being pushed out of the system. This also happens due to a sudden change of water pressure in the system. After a while, if noises and vibrations don’t go, then connect with a professional and advise the professional to reinstall the tubes of the water purifier.

4. Water Leaking From Filters, Membrane or Faucet

Leakage in the purifier’s faucet usually happens when a part does not fit properly. In this case, the part which is not fitting properly must be changed or get repaired or you may just try to tighten it yourself.

If the leakage is in the purifier or membrane, it could be due to a loosely fitted O Ring. (it is a soft rubber that prevents water leakage in purifiers). In both cases, you may call a professional and get the parts changed or repaired.

5. Tank Not Filling Up

A common issue in RO and UV purifiers is the tank not filling up. As mentioned above, a pressure of 40 to 60 PSI is needed for a purifier to work properly. If less, it won’t create much pressure and ultimately it will not fill up the tank. You can easily deal with this, just by increasing water pressure with the help of a water pump. Connected to there is another problem that may surface and that is of the clogged or damaged membrane.

A water purifier has a filter inside it. From this filter, the water passes. It stops all dust, particles, and viruses and provides us with clean and healthy water. Within the course of the period, the membrane gets clogged by continuous sedimentation of dust particles. This blocks the water. Thus, the tank stops getting filled. Not only does it blocks but also degrades the quality of water. You must change your membrane from time to time and also get it serviced, well.

We hope these tips help you in maintaining water sanitization and taking better care of your heath. You may always call to Aquafresh RO service center to repair your faulty water purifier.

Must Read: RO Water Purifier Maintenance Tips and Maintenance Cost